There are new alegations that GM knew about the problem with its ignition switches as early as 2001.

This story has been revised to reflect General Motors’ official response to the letter sent to Mary Barra by safety advocates Clarence Ditlow and Joan Claybrook.

As new evidence continued to pour out about a break-in of Democrat campaign headquarters that came to be known as “Watergate,” one of the critical questions posed about then-President Richard Nixon was what did he know and when did he know it. Four decades later, a similar question is being asked about General Motors in what some are now calling “Switchgate.”

The “-gate” reference has become a tired cliché, applied in far too many instances of crisis and intrigue. But the fundamental concern is much the same as with the Watergate scandal: It now appears that General Motors may have had the first signs of trouble as early as 2001 with ignition switches it used in a wide range of its compact models now linked to a dozen deaths, 31 crashes and hundreds of complaint reports.

That dates back to well before the first of the vehicles were put into production – and 13 years before GM announced it was recalling 1.6 million Chevrolet Cobalts, Saturn Ions and other models to make repairs to switches that could inadvertently turn from the On position to Off or ACC, in the process stalling out and leaving their airbags inoperable.

New documents released in court, as well as provided to the National Highway Traffic Safety Administration (NHTSA) by GM are raising new questions about the GM recall, even suggesting to some that the expanded recall the maker announced in late February might not cover all the affected vehicles.

Asked about such concerns – which have been raised by critics including former NHTSA director Joan Claybrook – GM spokesman Alan Adler told TheDetroitBureau.com,” The 1.6 million vehicles recalled in February are all the GM vehicles we are aware of that used this ignition switch.”

But Claybrook and Clarence Ditlow, director of the Washington-based Center for Auto Safety, are far from satisfied by such a response. “Only GM knows which of the death and injury claims on the Cobalt and other recalled vehicles are due to the ignition key defect. But it’s far more,” they contend in a jointly written letter sent to GM CEO Mary Barra yesterday.

Significantly, the safety experts contend that errors in reporting helped conceal the fact that there were more like 58 ignition switch-related deaths involving the Saturn Ion and Chevrolet Cobalt models.

“We appreciate the concern expressed in their letter,” Adler told TheDetroitBureau.com in an email regarding the letter. “GM is focused on ensuring the safety and peace of mind of our customers involved in the recall. It is true that new GM did not assume liability for claims arising from incidents or accidents occurring prior to July 2009. Our principle throughout this process has been to the put the customer first, and that will continue to guide us.”

It’s not unusual for engineers to discover issues during the pre-production stage.  They’re paid to find defects or potential flaws, though many of the things they discover would only go wrong under the least likely circumstances or through intentional misuse.  As a result, a manufacturer might opt to make changes, advise its service and field crews to keep a watch out, or simply ignore the issue.

Apparently, that was what happened when a problem was discovered with the 2003 Saturn Ion. An engineer discovered its ignition switch had a “low detent force.” In other words, the “detent,” the portion of the switch designed to keep the key in the On, Off or ACC position unless turned by the driver, could too easily be moved out of position inadvertently.

That proved to be a prescient discovery. In the years to come, motorists would have the switch on the Ion and other GM compacts shift out of the On position for a variety of reasons, including being bounced on a rough road or simply because a driver’s key ring was heavy.

GM contends the Saturn switch was fixed yet it was added to the list of recalled vehicles in February 2014. Whether that change was not good enough or, for that matter, passed on to other models is unclear. But as an estimated 240 complaints began to flow in – including the first in what would be 31 crashes resulting in 12 deaths – it might have triggered some sort of follow-up.  It didn’t.

The devastating results might have been avoided had something been done and, indeed, in an initial timeline GM offered federal regulators shortly after its February recall, it acknowledged that it considered a possible fix. The latest documentation now shows that an alternative was dropped “after consideration of the lead time required, cost and effectiveness.”

Indeed, a study of the latest documentation by the Detroit News found that a possible trigger could have come in 2003 when a Saturn dealer service technician reported having an Ion stall out while he was test-driving it in 2003. He noted the owner had a heavy key ring and the “additional weight of the keys had worn out the ignition switch.”

But after replacing the switch nothing else was done.

A side note to that missed opportunity is the fact that the now-abandoned Saturn division often boasted of its quality tracking system which once triggered a recall of every vehicle the company had produced at the time when service technicians reported seeing a water pump fail prematurely. The system proved itself by catching the fact that a supplier had inadvertently delivered an overly corrosive antifreeze to the Saturn assembly line.

Ultimately, there were four fatalities in Saturn Ions before last month’s recall.

(Toyota workers get first pay raise since 2008. For more, Click Here.)

There were other missed opportunities, and that’s now generating some finger-pointing between GM and NHTSA. The agency’s Acting Administrator David Friedman insisted this week that GM failed to provide complete and “timely information.”

Meanwhile, during a Senate hearing today, U.S. Transportation Secretary Anthony Foxx insisted, “Over the last decade there were complaints related to this particular vehicle and despite three crash investigations and other research the data was inconclusive.” He then added that what NHTSA itself saw – and with what it was being told by General Motors, “It just didn’t point to (the need for) a formal investigation.”

(Click Here to check out the Chrysler 200 saved one Detroit-area auto plant.)

Congress had beefed up the recall process in 2000, following a fiasco involving Ford Explorers and Bridgestone tires linked to 240 deaths, but the lower threshold set by the TREAD Act didn’t seem to be met. NHTSA took similar heat in October 2009 when Toyota launched the first in a series of recalls related to so-called unintended acceleration.  In internal documents the Japanese maker boasted about convincing NHTSA to scuttle an earlier recall plan.  Eventually, more than 10 million Toyota vehicles were impacted.

(To see how backup cameras saves lives, Click Here.)

It’s unlikely GM will come near that total, but critics are far from certain that GM has yet taken action to ensure that all the vehicles equipped with faulty ignition switches have been covered by recall.

Don't miss out!
Get Email Alerts
Receive the latest Automotive News in your Inbox!
Invalid email address
Give it a try. You can unsubscribe at any time.